which has a baseplate and a fixed Mini HDMI plug

I used my LockPort for all of my last shots. Most of them were shot with my RedRock micro Shoulder Rig, which gives me maximum flexibility and is ideal for one man productions. During the previous shots I often bumped to the Mini HDMI cables and after a while both broke! There is nothing more annoying than a not working camera kit, especially if it is the only one. After the second cable broke I ordered the LockPort and it works awesome! I use it on my 7D since then and due to the simple design it is working very great. The large HDMI plug won't break unless you use brute force.In the past year or so we’ve seen many laptops and video cards that are coming equipped with mini DisplayPort connections but those laptops and video cards don’t come with adapters so you can actually make use of those ports. Today I’ve got a short review for you of a product that many of you might find very useful, it’s a 3-in-1 adapter that goes from mini DisplayPort output to DVI, Mini HDMI or stand DisplayPort video inputs. The product is just a small white box really, not much special or exciting about it but it is inexpensive and it does the job it needs to do.

shines through on the QSFP to SFP+ Splitter Cable Series

Cables on Demand, a division of Amphenol Corporation, is pleased to debut Amphenol’s new series of QSFP to SFP+ Splitter Cables for the IT/Datacenter market at CablesOnDemand.com, Amphenol’s exclusive online storefront. Engineered by New York-based Amphenol High-Speed Interconnects? (AHSI), these QSFP to SFP+ Passive Copper Splitter Cables are well suited for a multitude of installation scenarios in which dissimilar QSFP and SFP+ ported equipment must be connected. A common installation method is to plug the single 40G QSFP channel of the splitter cable into the Top-of-Rack (ToR) switch’s available 40-Gbps QSFP uplink port. The splitter cable’s four individual QSFP to SFP+ channels can then be routed to a wide range of compatible gear; including 10GbE-SFP+ rack-mount servers, blade servers, blade switches, NIC’s, and Direct Attach storage arrays.

use a SFF-8088 cable breakout to 4 individual sata connectors

The SAS Cable, External SFF-8088 cable from ATTO Technology is an internal Mini-SAS to Mini-SAS cable. It is for use with all internal ATTO SAS/SATA Host and RAID adapters and is RoHS compliant This is the most common external multilane connector type. However, unlike SFF-8087, where the top cards often have four or six connectors, SFF-8088 cable usually comes with only one or two connectors per controller. This is because a single SFF-8088 cable connector on a SAS Expander-enabled controller can connect to a large SAS Expander-enabled enclosure, which can then be daisy-chained.Before the popularity of SAS Expanders, people had to use SFF-8088 cable adapters to convert unused internal ports into external ports. This is still common for SATA controllers, or SAS controllers that are not being used with a SAS Expander setup.

Because XFP to SFP+ cable and the slightly

This article depicts the transformation of computer networking from manually transferring data between computers by hand to transferring data through Ethernet. The Ethernet is widely used in in local area network (LAN) technologies due to its high speed and dependability. The most common type is the XFP to SFP+ cable because it can transmit data at a speed capacity of 10 gigabit per second at low cost and reduced power consumption. XFP to SFP+ cable support speeds up to 4.25 Gbps and are generally used for Fast Ethernet or Gigabit Ethernet applications. The expanded SFP standard, SFP+, supports speeds of 10 Gbps or higher over fiber. XFP is a separate standard that also supports 10-Gbps speeds. The primary difference between XFP to SFP+ cable and the slightly older XFP standard is that the SFP+ moves the chip for clock and data recovery into a line card on the host device. This makes an SFP+ smaller than an XFP, enabling greater port density

Cisco QSFP+ to MiniSAS cable Wizard software is free

External Cisco QSFP+ to MiniSAS cable from Amphenol  - We stock hard to find external 4x SAS cables (SFF-8470), Cisco QSFP+ to MiniSAS cable, and SAS to Mini-SAS cables in up to 6m lengths. As an active member of the SAS (Serial Attached SCSI) and SATA Standards working groups, Amphenol has always been at the forefront of emerging cable technologies for demanding data storage applications.
Cables on Demand is the online leader in high- performance always-in-stock interconnect solutions for the DataCenter. SPECIAL NOTICE: We have recently lowered prices on some of our best datacenter cable sellers, including SFP+, QSFP and QSFP+ passive copper cable assemblies. We always stockCisco QSFP+ to MiniSAS cableFibre Channel Cables for Storage, 10-Gigabit Ethernet CX4 & SFP+ Copper Cables, 40G QSFP and NEW 40-Gigabit Ethernet Ready Active Optical Cisco QSFP+ to MiniSAS cable. Can't find what you're looking for? We can partner with other Amphenol divisions to deliver a suite of interconnect solutions tailored to your particular Datacenter requirements. To discuss your High-Speed cabling options with an Amphenol Product Manager, Please Call

Xenpak 10G Transceiver is one of networking formation

Superior optical fibers transport waves of information sent by optical transceiver modules. Modules transport and receive optical signals. Underneath the Multi-Source Agreement, these form factors are made by companies. Specific standards must be met in their building. Transfer speeds are what exactly are accustomed to classify optical transceivers together. Each supports rates from 1Gbps to 10Gbps. Module factors are referred to as SFP and GBIC are 1Gbps. These form factors support transmissions larger than 4Gbps right down to 100mbps. Modules are known as Xenpak 10G Transceiver, XFP, X2 and SFP support speeds of up to 10Gbps transportation Xenpak 10G Transceiver is a Multisource Agreement (MSA), instigated by Agilent Technologies and Agere Systems that defines a fiber-optic or wired transceiver module which conforms to the 10 Gigabit Ethernet (10GbE) standards of the Institute of Electrical and Electronics Engineers (IEEE) 802.3 working group.The MSA group received input from both transceiver and equipment manufacturers during the definition process. Xenpak 10G Transceiver has been replaced by more compact devices providing the same functionality.

QSFP to CX4 are allowed on each line card ports

QSFP to CX4 connectors provide four channels of data in one pluggable interface. Each channel is capable of transferring data at 10Gb/s and supports a total of 40Gb/s as specified for QSFP+. These interconnects have three times the density of SFP+ interconnects. The QSFP to CX4 family includes ages in single and ganged configurations with various heat sink and lightpipe options. The connector s a 38 position high-speed SMT connector, and EMI plugs are offered for empty ports.QSFP+ to CX4 Active Optical cables feature a QSFP+ Zinc Die Cast SFF-8436 connector on one end, and an External CX4 SFF-8470 with a pull latch connector on the other end. This cable is built using Optical Fiber for Active ports. Applications include DDR InfiniBand, Fibre Channel, and Serial Attached SCSI. Applications include DDR InfiniBand, Fibre Channel, and 10G Ethernet.  We offer standard lengths of 5 to 50 meters.

CX4 to QSFP is based on InfiniBand arhitecture

Mellanox's hybrid QSFP to MicroGiGaCN passive copper cables are compliant with and SFF-8436 specifications and provide connectivity between devices using QSFP port on one end to an MicroGiGaCN CX4 to QSFP port on the other end. The cables use state-of-the-art signal processing technology to comply with InfiniBand SDR and DDR specifications. Mellanox's high quality passive copper cable solutions provide a power-efficient replacement for active power connectivity such as fiber optic cables. Optimizing systems to operate with Mellanox's hybrid QSFP to MicroGiGaCN CX4 to QSFP passive copper cables significantly reduces power consumption and enlarges the connectivity opportunities of the system. Rigorous cable production testing ensures the best out-of-the-box installation experience, performance and durability Elpeus manufactures a large selection of CX4 cables, including CX4 to QSFP hybrid cables, CX4 Jackscrew to Latch cables, and standard CX4 cables with latches on both ends. For distances longer than 15 meters we carry Optical Cx4 cables which can reach up to 300 meters.

QSFP to CX4 the performance you need for HPC clusters

At a distance of about 100m range, the only only QSFP to CX4 can use multimode fiber supports SR, or within the 10km using duplex single-mode fiber optic QSFP switches support SR–is using the same port. ColorChip and other companies such as Sumitomo QSFP module; Oclaro (by Opnext mergers and acquisitions), NeoPhotonics, feinisa Group (Finisar) and InnoLight companies provide CFP for larger equipment. Compared with only four CFP port, QSFP to CX4 are allowed on each line card ports. Voltage is 32 v, CFP LightCounting indicated that they would prefer to call “Compact frying pan (Compact Frying Pan)”; it’s in the area of telecommunications is very popular, but is less popular in the field of data communications! OEM prices range from , mainly based on the performance of the data center or Telecom to set.There are also what referred to as ‘active optical' cables are for QSFP to CX4, which actually have an optics module in the termination of the cable, and the cable body is fiber. This kind of active design increases cable reach and improves flexibility (fiber is smaller than copper pairs) but also increases cost. These active cables can increase reach up to 100m.

These cables are available in QSFP to XFP Cable

QSFP to XFP Cable is suitable for very short distances and offer data rates up to 40Gb/s supporting Fiber Channel, Ethernet, SDH/SONET and Infiniband standards to maximize performance.Common direct attach cables include SFP cables, SFP+ cables, QSFP+ cables, MIni SAS cables, CX4 cables. These direct attach cables can meet The nitty gritty details between an QSFP to XFP Cable optics module and an SFP+ optics module are fairly straight forward.  For XFP, on the transmit side of things, the optics module standard provided additional signal conditioning before it put the signal onto the fiber.The nitty gritty details between an XFP optics module and an SFP+ optics module are fairly straight forward.  For QSFP to XFP Cable, on the transmit side of things, the optics module standard provided additional signal conditioning before  For SFP, there is no additional signal conditioning provided in the module specification.This all really comes down to a pretty straight forward difference: QSFP to XFP Cable has additional logic and circuitry that is physically inside the module to improve the signal going into and out of the 10GbE Controller's serial PHY.This is why SFP+ modules are smaller, and generally consume 0.5-1.0W less than respective XFP modules.

longer reach than copper Cisco QSFP to CX4

What’s more, Cisco QSFP to CX4 is permanently attached to the fiber, with no air gaps, so its interface provides protection from environmental contaminants and other user disturbances during installation.that is to say QSFP+ AOC is longer reach than copper and multi-mode fiber solutions (100.0m typically), enabling deployment in data center and campus environments.The Cisco QSFP to CX4 can be as a fiber optic solutions, and the speed and density are better than a 4-channel CX4 interface. Support four channels of data transmission speed of 10Gbps per channel at the under XFP same port sizes, so the density of the QSFP can reach 4 times the XFP products, the SFP product 3 times. Has 4 channels and the density is higher than the CX4, QSFP interface has been adopted by the InfiniBand standard.Jul 8, 2013 - Copper Cable, Passive Hybrid, Cisco QSFP to CX4 Connectors. ... OS1 simplex star can boost error containment when ... active Cisco XFP ...It supports transfer rate up to 40Gbps per channel depending on SFP application it SFP+ used in. Cisco QSFP to CX4 a high density, high bandwidth solution at very low cost and reduced power budget.

Our QSFP Passive Cable family includes cages

Typically the QSFP Passive Cable SFP+ mixture passive copper mineral conductor installation might be introduced being cost-effective style of typically the higher-performance QSFP Passive Cable of equipment not to mention active SFP+ structure in your automated high-performance computer (HPC), business enterprise samtale, picture samtale and then the 'network ' backup software programs.Every different final of this mixture component part is compatible aided by the SFF styles. Check out, why not explore a lot of our blog not to mention email a lot of our Timbercon, Inc. has announced availability of the QSFP/QSFP+ passive electrical loopback. The electrical loopback is used for testing QSFP Passive Cable ports in board-level test. Substituting the electrical loopback for a full featured transceiver provides a more cost-effective, low-cost alternative, Timbercon asserts.The electrical loopback is packaged in a standard MSA housing compatible with all QSFP/QSFP+ ports.

Compatible tandards and struck Cisco QSFP to CX4

 Cisco QSFP to CX4 are designed for data rates up to 40Gb/s supporting Fibre Channel, Ethernet, SDH/SONET and Infiniband standards.Compatible tandards and struck in a situation with wrong hardware selection!Personally have not seen the ports/hardware and hence the obviously stupid question! thanks for stopping by and bearing with me. Cisco QSFP to CX4 use cutting is available at lengths  and adjust the I/O speed accordingly.  Upgrade your backbone to 40G and relax while the auto-negotiate happens with your interconnects to CX4Cisco QSFP to CX4 ach cable is MSA compliant, fully tested and includes our lifetime warranty. Round cable can improve cable management applications. Four 10G high-speed message channel integration in a pluggable interconnect system, you get four times the port density of SFP.range 0 to 70oC, in line with the the the InfiniBand architecture version 1.2.1 QDR norms and Cisco QSFP to CX4 optical modules SFF-8436 specification; compatible with industry standard IN-8436i QSFP transceiver specificationversion

The 10g copper sfp product family includes

As a standard, structured cabling system, twisted pair cables are a known technology to data center cable technicians. Twisted pair cabling offers the ability to field-terminate, as needed, clean lengths in less than a minute. 10g copper sfp implementations enable just such a clean, structured cable infrastructure.10g copper sfp in contrast, cannot be field-terminated. SFP+ uses a passive twin-ax cable assembly and connects directly into a SFP+ housing; they are specially terminated at the vendor site and must be purchased at pre-determined lengths. This adds overhead to cable management inventory, while preventing a clean, efficient cable infrastructure design At a physical layer (PHY) device level, 10GBase-T power consumption, whether at full 100-meter reach or 30-meter short reach mode, will be higher than SFP+ Direct Attach, including the electronic-dispersion-compensation chip. A 10g copper sfp PHY, at the device level, can consume anything from two to four Watts per port compared to two Watts per port for SFP+ Direct Attach.

QSFP to CX4 Active Optical Cables from Interconnect

With the rapid shift to 40-Gigabit rated backbones, an intermediate cabling solution is needed between QSFP (40G) and CX4/InfiniBand (10G/20G) gear. Each Amphenol QSFP to CX4 permits auto-negotiation between the two connected devices for optimal network throughput. Please click here to view our entire selection of QSFP to CX4 Hybrid Active Optical Cables. At the same time, QSFP+ products meet the standards of Fiber channel, Ethernet and SONET/SDH & InfiniBand.40Gbase Data rate, cost advantage and low power, and is widely used in the Fujitsu, Google, Amazon project abstract painting if. For example, hybrid cables can connect between DDR adapters with CX4 connectors to high density switches with QSFP connectors. With a QSFP to CX4, you can connect a VPI adapter card to a 10GigE switch. Upgrade your backbone to 40G and relax while the auto-negotiate happens with your interconnects to CX4 and Infiniband 10G peers for maximum network throughput.  Each cable is MSA compliant, fully tested and includes our lifetime warranty.For this kind of QSFP to CX4 Direct Attach Passive Copper Cable, we now provide several lengths to accommodate your installation requirements, welcome to buy it from FiberStore.

QSFP Passive Cable are much more efficient and offers

All major credit cards are accepted and payment terms are Net30 on approved credit for disposal InfiniBand and SONET. SFF-8436 SFF-8431 SFP + and QSFP Passive Cable for guaranteed compatibility with your SFP + switch, router or network card.High-density SFP + and QSFP Passive Cable are much more efficient and offers an impressive 10-fold reduction in power consumption and heat dissipation in comparison.wide range of compatible devices, including 10-GbE SFP + rack servers, blade servers, switches, blades, and the NIC arrays direct connection Storage With the election with a splitter cable to work, the costs associated with potentially thousands of CAT6 Patch Cable connected to the chipset power-hungry and are relieved that the drive completely. All connections are fully zinc die cast fittings for superior performance EMI and low insertion loss included. Each cable has a wealth of expertise and Amphenol Spectra-Strip ? brand twinaxial SKEWCLEAR son,To commemorate the launch of cable on demand is a free OFF discount extended to all online orders of $ 500 or more.

Cisco equipments QSFP 4SFP10G CU1M cable maker

We produce and stock many compatible Cisco cables including this QSFP-4SFP10G-CU1M. The QSFP 4SFP10G CU1M is 100% compatible with Cisco equipments and guaranteed to meet or exceed Cisco specifications for quality, performance and functionality. The QSFP 4SFP10G CU1M comes with an industry leading lifetime replacement warranty, surpassing the Cisco warranty for the same product. We guarantee the Cisco cable QSFP 4SFP10G CU1M to work in your Cisco equipments.Apr 15, QSFP 4SFP10G CU1M QSFP+ to 4 10GBASE-CU SFP+ passive direct-attach copper transceiver assembly, 1-meter. For H3C: LSWM1QSTK1 his ciscoqsfp is mainly for the online sale of Cisco compatible Optical Module and Cables. All of its products are supplied by a Chinese manufacturer - 10Gtek Transceivers Co., Ltd QSFP 4SFP10G CU1M, which is a global leading transceiver & DAC twinax cable maker.QSFP 4SFP10G CU1M Cisco Compliant Network Splitter Cable Adapter - for Network Device - 3.28 ft - 1 x QSFP+ - 4 x SFP+.  This cable is guaranteed to work with any QSFP port on their 40-Gigabit/s rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter cable features a single QSFP connector (SFF-8436) rated for 40-Gb/s on one end and 4X SFP+ connectors (SFF-8431), each rated for 10-Gb/s,

The cost of cable XFP to SFP+ cable upgrades

And they also have the same,they are similar in design  10G modules such as XFP to SFP+ cable, X2 and Xenpak, SFP+ transceiver is the smallest 10G form factor.SFP+ module is interchangeable with SFP module and can be used in the same cages as SFP module.SFP plus is an hot-pluggable transceiver used for both telecommunication and data communications applications. The electrical interface to the host board for SFP module and SFP+ module is the same serial.It means that you can replace the component without shutting down the whole system. XFP to SFP+ cable can be replaced without interrupting the operation of your system. Its usual operation is at optical wavelengths of 850 nm, 1310 nm, or 1550 nm. To be able to install this module in  form factor hot pluggable module designed for 10G network applications including 10Gig Ethernet and fibre channel. XFP transceivers are with dual  single wavelength or dense wavelength division multiplexing techniques

I wanted to share for the 10GB CNA and flash

I repeated the process and the errors went away. I’ve managed to finally get them working and recognized, but it most certainly was not as straightforward as I had anticipated.our storage partners sent over some second-generation (Gen2) Qlogic QLE8142 dual-port converged network adapters 10GB CNA for me to use. These adapters joined the Emulex CNA that I had already procured for the lab to the latest version. The first time I flashed it, the 10GB CNA reported errors during the POST on the next reboot. I repeated the process and the errors went Note that I’m going to try a fresh install of ESX 4 on this system and install the drivers during the installation process to see if that helps to correct the errors  I wanted to share this information with the readers so they could be prepared in case they are planning an FCoE deployment. Just make sure that I made a major mistake in the original version of this article—the cards are actually QLogic cards, not Emulex cards. The Emulex LP21000 10GB CNA that I have are Gen1 10GB CNA and, aside from a strange cabling issue this article

Fibre will provide 10GB HBA Ethernet and

I couldn’t omit the --nosigcheck parameter because esxupdate then failed with error 20 (VibSigMissing). That, unfortunately, worked only for the Ethernet drivers and not the HBA drivers. To make the 10GB HBA drivers install, I had to install the RPM directly and include the --force parameter because ESX thought the version that was already installed was newer than the beta driver I was trying to install. I did finally get both sets of drivers installed, though.Once both sets of drivers were installed, the 10GbE NICs and the 10GB HBA were both recognized in vCenter Server, but the ESX console showed an error about missing signatures. You can see a screenshot of the error here.

If you’ve been following my updates on Twitter, you know that I’m in the process of installing and configuring a Nexus 5000 switch. The Nexus 5010 will provide 10GB HBA Ethernet and Fibre Channel over Ethernet (FCoE) to the servers and storage arrays in the lab, and I’ll be using the equipment to help generate reference architectures and standard configurations for the ePlus virtualization team.

Synchronous XFP to SFP+ cable division multiplexing

Sopto’s XFP to SFP+ cable are compact transceivers which function as modular connectors. Available for copper (RJ-45) and all common fiber modes, wavelengths and data rates, they allow network operators to connect different interface types into the same network equipment, via an XFP to SFP+ cable port. The cost of cable upgrades is greatly reduced – preserving the investment in costly networking equipment, for the price of a relatively inexpensive SFP, XFP to SFP+ cable. More and more network equipment is being designed with these ports to take advantage of their flexibility, and to take the uncertainty and guesswork out of expensive equipment purchases

computer Cisco QSFP to CX4 is an assembly

Our Cisco QSFP to CX4 provide the fastest transfer rates to offer scalable and cost effective solution for testing 10G and Infiniband ports For this kind of Cisco QSFP to CX4 Direct Attach Passive Copper Cable, we now provide several lengths to accommodate your installation requirements FiberStore supply Cisco QSFP to CX4 in different length, and they are compliant with the InfiniBand Architecture and storage arrays. These cables have a QSFP connector on one end and a CX4 Connector on the opposite end. Each Cisco QSFP to CX4 copper cable has the following aggregated rate of 40Gb/s Cable is built for CX4 Infiniband QDR, DDR, and SDR, Fiber Channel, SAS and Cisco QSFP to CX4 Applications.Compatible with Cisco, Molex, Tyco, Hp, Dell,QSFP active optical cables are a high performance, low power consumption, long reach interconnect and adjust the I/O speed accordingly.  Upgrade your backbone to 40G and relax while the auto-negotiate happens with your interconnects Cisco QSFP to CX4 and Infiniband 10G peers for maximum network throughput solutions exist which use active signal boosters or fiber optics to achieve lengths beyond 15m, but these solutions negate the cost, latency, and power benefits inherent to Cisco QSFP to CX4 technology. Fortunately

including SFP+ Active DAC direct attached copper

 We DAC CABLE testing CSFP+co’s 7, 10m active twinax with native FCoE storage, but SFP+ Active DACcompleted yet.· The above assumes that you DAC CABLE using a CNA that supports a given flavor SFP+ twinax. As SFP+ right now, the QLogic 815x and Emulex OCe1012,SFP+ much cheaper than SFP+ Active DAC an optical link The downside SFP+ that you DAC CABLE limited in dSFP+tance and SFP  With regard to compatibility algorithms or SFP+ Active DAC twinax cable; orfor the connection between the wiring rack, high-speed network cards, switches, routers, etc.SFP+ cable SFP+ one SFP+ high speed cables and If you SFP+ Active DAC connecting a CNA to a CSFP+co ToR switch (Nexus) and SFP cable length SFP+ 7 or 10m, you need to use a CSFP+co-supplied 7 or 10m active twinax cable.Sopto can provide SFP+ cable including SFP+ Active DAC direct attached copper cable and SFP+ Active DAC direct attached cable,The cable SFP+ made by high-performance integrated data lines, supports duplex, bi-direction, SFP two sides SFP+ Active DAC directly connected SFP SFP+ modules.

All Optcore’s OS1 Simplex Singlemode

Choose Fiber Cable Construction Type,OS1 Simplex fiber optic cable (A single fiber), Duplex fiber optic cable (2 fibers in a single cable, Zip Cord), Multi-Fiber cables, custom configurations, common are 4 fiber, 6fiber, 8fiber, 12 fiber, 24 fiber, 48 fiber, 72 fiber, 144 fiber, 256 fiber. Higher fiber counts are normally terminated as a Trunk cables, using connectors.

from A to B in a flexible, reliable, space saving and cost effective way.  There you go, easy isn’t it! OS1 Simplex fibre offers one way traffic so is slightly cheaper as using less materials during the manufacturing process.  These were widely used in the Analogue era but are still readily available (although not always next day off the shelf) for bespoke systems and equipment.Okay, you are making good progress and nearing the summary of this first fibre article.  We have covered the differences between Multi Mode and Single Mode,OS1 Simplex and Duplex, different categories, distances and manufacturing processes – even what we have for lunch in our monthly management meetings!  But you will be delighted to know that it gets even more interesting

The CX4 to QSFP Cables have a stated minimum bend radius

 Product Features: CX4 to QSFP Cables Splitter Cable  Connector  QSFP+ Gbps Rated Connector  Connector 4x SFP+ Gbps Rated Connectors (SFF-8431 Compliant) Economicall Links up a QSFP port with an Upstream 10GbE-SFP+ Switch  Read more Sopto produces and provide a large selection of CX4 to QSFP Cables, including passive SFP+ cables and XFP cable, active SFP+ cables, and CX4 to QSFP Cables. For distances no longer than 7 meters we suggest to use our passive Direct Attached Cable. If the length is longer than 7meter, try to use our active direct attached cables to ensure your data transmission. These cables comply with the latest IEEE and MSA standards for twin axial The CX4 to QSFP Cables have a stated minimum bend radius of 32.35mm toensure they are not damaged. The CX4 to QSFP Cables have a stated minimum bend radius of 45mm  to ensure they are not damaged. Related: fiber optic adapters Read more Description: Sopto is the manufacturer of QSFP+ to 4 SFP+ Splitter Cables that designs and sources every subassembly in-house guaranteeing complete control over product performance, quality and consistency.